Best Removable Motorcycle Wheel Chock For Trailer : Review And Buying Guide

LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike; Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock); Ideal for one-person motorcycle loading

EASY TO USE: Designed with one-person loading in mind; Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included); Takes only minutes to install and seconds to load and unload

MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate; Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed; 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length

BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware, thermoplastic end caps for added strength; Makes loading and transportation safe and simple for just one person; Mount securely and motorcycle front wheel stand will stay locked in when empty

PACKAGE CONTENTS: Motorcycle trailer accessories package includes (1) removable motorcycle wheel chock for trailer and (4) bolts, flat washers, lock washers, nuts, and spacers for mounting on a stationary location

Strong Hold: Stabilize your bike as you travel or haul with this dirt bike wheel chock for trailer made from heavy-duty tubular steel

Easily Removable: Need your trailer for other purposes? This motorcycle wheel chock is removable to let you move the chocks out and use the bike’s space

Design and Quality: The sleekest bike grab wheel chock you’ll find, with a thick chrome coating that also prevents corrosion

One-Stop Chock: A versatile motorcycle rear wheel chock for your motorcycle, trailer or garage, permanent or removable

Quick Installation: Pre-drilled holes in these motorcycle wheel chocks for trailer means you can bolt it on and secure your bike in minutes

Adjust to fit almost any motorcycle front wheel size(17"-21"); Can be Used in Storage,Transport,Maintenance and Repairing

Base Plate - 10.5" x 15.5" (L x W); Cradle Height: 13.5" (Cradle Holds tires up to 6-3/8" wide)

Pivoting bracket can close on any motorcycle tire, securing the bike in the upright position

Simply Push Or Drive The Bike Into The Cradle; Ideal for One-person Motorcycle Loading

Make from Heavy Duty Steel Q235 Material for excellent quality; Easily Mounts to Any Truck,Trailer or Floor

Use to secure 1 motorcycle for truck and trailer transport, or as free-standing chocks in a garage, showroom or parking lot; no drilling or bolting required

Arms adjust from 43 to 108 inches wide; fits tires from 15 to 22 inches in diameter

Tire cradle adjusts from 28.75 to 32 inches; front stop adjusts from 14.5 to 18.5 inches

Chocks will hold motorcycle upright so single person can secure it with tie-downs; removable center posts and tire cradles for low profile storage

High-strength aluminum construction; heavy-duty epoxy rubber end caps

Heavy-duty wheel chock for motorcycle tires up to 5.5" wide

Permanently fixed mounting brackets and tee nuts allow easy, tool-free removal of the wheel chock when not needed

Height: 9", Interior Width: 5.75", Total Length: 12"

Constructed from chrome-plated steel tubing

The included mounting hardware allows installation on surfaces no thicker than 1.25"; for thicker surfaces, additional mounting hardware is required

HEAVY DUTY WHEEL CHOCK — Fasten the CargoSmart Motorcycle Wheel Chock to your trailer floor to help stabilize your bike when on the move. Fits up to 7” wide tires

STABILIZE YOUR BIKE — Wheel chock helps stabilize the front or rear wheel of your motorcycle during transportation; To properly secure your motorcycle, always use with tie down straps

SPRING-LOADED FITTINGS — Simply clip the wheel chock's spring-loaded fittings into the X-Track or E-Track system for a safe and secure connection

EASILY REMOVABLE — The connectors allow you to easily move or completely remove the wheel chock as organization changes are needed; Use the mounting holes to permanently attach the wheel chock to the trailer floor

CARGOSMART — Our mission is to engineer cargo management solutions to safely & securely get you to where you’re going Our bike/sports racks, cargo carriers, ramps, & organizational solutions work as hard as you do – on the job or next outdoor adventure

Product Type: Auto Accessory

Package Quantity; 1

Package Dimensions: 22.0 cms (L) x 22.0 cms (W) x 31.8 cms (H)

Package Weight: 6.0 lbs

5-3/4 inch inside width is perfect to accommodate the storage of mopeds, dirt bikes and most motorcycles

Clean chrome-plated finish

Quick and easy installation to your truck bed or trailer floor with included hardware

Includes quick release hardware allowing for a smooth transition from storage to riding

Measures 11.25 inches long by 8.25 inches high

Allows for easy one person loading. Simply push or drive the bike into the cradle. The pivoting bracket will close on the motorcycle tire securing the bike in the upright position and allowing 1 person to now secure bike with tie-downs.

To remove, pull back on your bike and chock automatically releases the wheel.

Adjust to fit almost any front motorcycle wheel. Comes with a 5 year warranty.

Made from heavy gauge steel, Zinc plated cradle with all necessary mounting hardware included.

Removable hardware allows for quick removal utilizing your floor for other purposes.

✅ Pit Posse’s wheel chock is designed to hold your bike’s front wheel down to withstand any ride or travel.

✅ Will keep the front wheel of any motorcycle up to 3 1/2 inches wide

✅ Mounting points allow the chock to easily be removed when the truck bed or trailer is needed for other loads

✅ Mounting hardware included

✅***PLEASE NOTE- THIS IS 3.5 Inch wide. Please measure and make sure this will work for your bike. We will not accept returns due to non measurement of the wheel

Includes (1)BK100 Deluxe Wheel Chock, (2) BK202 Retractable Ratchet Straps, (2) Quick-Release D-Rings, (2) Quick-Release Strap Clips, (1) Mounting Plate, and (1) Front-Tire Ratchet Strap